Zephyrproject
Vulnerability activity for Zephyrproject: what is being exploited, what was published lately, and when the next patch release is due.
Last 30 days
- CVEs
- 15
- Critical (CVSS 9+)
- 0
- Exploited (CISA KEV)
- 0
- With exploit code
- 0
Last 90 days
- CVEs
- 29
- Critical (CVSS 9+)
- 0
- Exploited (CISA KEV)
- 0
- With exploit code
- 0
Last 365 days
- CVEs
- 39
- Critical (CVSS 9+)
- 0
- Exploited (CISA KEV)
- 0
- With exploit code
- 0
Exploited now
None of this vendor's CVEs are on CISA's known-exploited list.
Recent
- 6.5MediumOct 23, 2026Zephyrproject zephyr Crypto / certificateCVE-2026-79981The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port left at 0 so the stack picks an ephemeral port exactly once. dns_write() then sends every subsequent query from that same socket without re-binding, so the source port is constant for the lifetime of the resolver context while only the 16-bit transaction iden
- 5.6MediumOct 23, 2026Zephyrproject zephyrCVE-2026-79980The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDIS
- 7.8HighOct 23, 2026Zephyrproject zephyr Memory corruptionCVE-2026-79979The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is mapped with MT_NG, i.e. non-global.
- 3.6LowOct 23, 2026Zephyrproject zephyr Memory corruptionCVE-2026-79978The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will report (read_len = MIN(fifo_bytes, buf_avail)) to the space actually returned by rtio_sqe_rx_buf(), but then queues one 6-byte bus read per hardware FIFO entry at consecutive offsets from read_buf, bounded by the device-reported entry count rather than by the clamp. When the allocated buffer is smaller than a full batch, the driver writes
- 8.2HighOct 23, 2026Zephyrproject zephyr Auth bypass / access controlCVE-2026-79977The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be
- 7.5HighOct 23, 2026Zephyrproject zephyrCVE-2026-19741Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART
- 8.8HighOct 23, 2026Zephyrproject zephyr Memory corruptionCVE-2026-79982The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_
- 7.1HighOct 21, 2026Zephyrproject zephyr Memory corruptionCVE-2026-79976The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and s
- 6.3MediumOct 21, 2026Zephyrproject zephyr Memory corruptionCVE-2026-78119The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all
- 7.0HighOct 21, 2026Zephyrproject zephyrCVE-2026-78118The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread(
- 4.2MediumOct 21, 2026Zephyrproject zephyrCVE-2026-78117The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth
- 5.2MediumOct 21, 2026Zephyrproject zephyr Memory corruptionCVE-2026-78116The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other
- 5.3MediumOct 21, 2026Zephyrproject zephyr Auth bypass / access controlCVE-2026-19947The device multiplexer pseudo-driver in drivers/misc/devmux/devmux.c exposes two system calls, devmux_select_get() and devmux_select_set(). When CONFIG_USERSPACE is enabled, their user-mode verifiers z_vrfy_devmux_select_get() and z_vrfy_devmux_select_set() forwarded directly to the kernel implementations without performing any kernel-object validation — no k_object_access_check() and no driver object check. Compounding this, DEVICE_DT_INST_DEFINE() registered devmux instances with a NULL driver
- 7.8HighOct 21, 2026Zephyrproject zephyr Memory corruptionCVE-2026-19676The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those
- 3.5LowOct 21, 2026Zephyrproject zephyr Memory corruptionCVE-2026-18748The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_confi
- 3.7LowSep 28, 2026Zephyrproject zephyr Memory corruptionCVE-2026-18416The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the option length len. When a registered path segment is longer than the supplied URI and the URI is a prefix of it, the loop reads uri[len] and beyond, past the end of the option value.
- 6.3MediumSep 28, 2026Zephyrproject zephyr Memory corruptionCVE-2026-18415ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled
- 7.8HighSep 28, 2026Zephyrproject zephyr Memory corruptionCVE-2026-18414The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + ext
- 7.8HighSep 28, 2026Zephyrproject zephyr Memory corruptionCVE-2026-18413The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before as
- 7.8HighSep 28, 2026Zephyrproject zephyr Memory corruptionCVE-2026-16513The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the newly acquired submission-queue entry through a pointer taken verbatim from user mode, with no K_SYSCALL_MEMORY_WRITE check in front of it. Any user-mode thread that has been grante
- 8.8HighAug 17, 2026Zephyrproject zephyr Memory corruptionCVE-2026-9771The flash_copy() system call is verified by z_vrfy_flash_copy() in drivers/flash/flash_util.c. On builds with CONFIG_USERSPACE enabled, this handler is the kernel-side trust boundary for a user-mode caller. Prior to the fix it validated only the output buffer (K_SYSCALL_MEMORY_WRITE) and passed the two struct device * arguments, src_dev and dst_dev, directly into the implementation without any object validation — unlike every sibling flash syscall, which guards its device pointer with K_SYSCALL_
- 4.3MediumAug 17, 2026Zephyrproject zephyr Memory corruptionCVE-2026-12630Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table. The iphc word is taken dire
- 4.6MediumAug 17, 2026Zephyrproject zephyr Denial of serviceCVE-2026-12629The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for
- 5.0MediumAug 17, 2026Zephyrproject zephyr Memory corruptionCVE-2026-12519The WNC-M14A2A LTE-M modem driver mishandles unsolicited %NOTIFYEV: events in on_cmd_socknotifyev() (drivers/modem/vendor_standalone/wncm14a2a.c). The response line is linearized into a fixed 40-byte stack buffer via net_buf_linearize(), which caps the copy at 39 bytes and returns out_len <= 39. The two quote-delimiter scanning loops, however, were bounded by len — the full CR/LF-delimited frame length returned by net_buf_findcrlf() — rather than by out_len. When a %NOTIFYEV: line longer than 3
- 8.4HighAug 10, 2026Zephyrproject zephyr Memory corruptionCVE-2026-8718tls_opt_dtls_peer_connection_id_value_get() in subsys/net/lib/sockets/sockets_tls.c, which handles getsockopt(SOL_TLS, TLS_DTLS_PEER_CID_VALUE), passed the caller-supplied optval directly to mbedtls_ssl_get_peer_cid() without verifying the buffer was at least MBEDTLS_SSL_CID_OUT_LEN_MAX (default 32) bytes. mbedtls_ssl_get_peer_cid() copies the peer-negotiated DTLS Connection ID (length 1..MBEDTLS_SSL_CID_OUT_LEN_MAX) into that buffer without a destination-size parameter, so a caller-supplied opt
- 2.5LowAug 10, 2026Zephyrproject zephyrCVE-2026-11812The UpdateHub management subsystem (subsys/mgmt/updatehub/updatehub.c) drives every update operation through a single file-scope ctx structure that holds the CoAP block context, payload buffer, status code, socket, and a one-element poll-fd array fds[1]. Access to ctx was not serialized, and prepare_fds() wrote ctx.fds[ctx.nfds] and incremented ctx.nfds with no bounds check. Two independent paths mutate ctx concurrently: the background autohandler running on the system workqueue, and user-trigg
- 3.7LowAug 10, 2026Zephyrproject zephyr Denial of serviceCVE-2026-11811The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwr
- 7.5HighAug 10, 2026Zephyrproject zephyr Memory corruptionCVE-2026-11810The UpdateHub firmware-update agent's probe handler (z_impl_updatehub_probe() in subsys/mgmt/updatehub/updatehub.c) parses the JSON metadata returned by the update server into a fixed two-level nested-array struct. After parsing it validates only the outer array length (objects_len != 2) and then dereferences objects[1].objects[0].objects.sha256sum via strlen() without checking that the inner object array of element [1] is non-empty. The metadata is attacker-influenceable network input: the age
- 3.7LowAug 10, 2026Zephyrproject zephyr Memory corruptionCVE-2026-11809The UpdateHub OTA client in subsys/mgmt/updatehub/updatehub.c contains an out-of-bounds / uninitialized-memory read in z_impl_updatehub_probe(). The probe response from the UpdateHub server is copied into a heap buffer (metadata) that is correctly NUL-terminated, but a second buffer (metadata_copy) is allocated with k_malloc (unzeroed) and filled with memcpy(metadata_copy, metadata, strlen(metadata)), which omits the terminating NUL. Everything after the copied content remains uninitialized heap
- 8.2HighJul 14, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10672subsys/net/lib/lwm2m/lwm2m_pull_context.c copied the firmware-update Package URI into a fixed static buffer (context.uri, size CONFIG_LWM2M_SWMGMT_PACKAGE_URI_LEN, default 128) with memcpy(context.uri, uri, LWM2M_PACKAGE_URI_LEN), copying exactly the destination size with no length validation. The Firmware-Update object stores the server-supplied Package URI (/5/0/1) in a 255-byte buffer, so a LwM2M management server (or an on-path attacker on a session lacking strong DTLS) can WRITE a URI of 12
- 7.1HighJul 14, 2026Zephyrproject zephyrCVE-2026-10671In Zephyr's kernel pipe implementation, the userspace syscall verifier z_vrfy_k_pipe_init() in kernel/pipe.c used K_SYSCALL_OBJ() (which requires the kernel object to already be initialized) instead of K_SYSCALL_OBJ_NEVER_INIT() (which rejects an already-initialized object). As a result, on CONFIG_USERSPACE builds an unprivileged user thread that has been granted access to a k_pipe object can invoke the k_pipe_init syscall to re-initialize a pipe that is already in use. z_impl_k_pipe_init() unc
- 5.5MediumJul 14, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10670The CONFIG_USERSPACE verification handler for the k_thread_name_copy() system call (z_vrfy_k_thread_name_copy() in kernel/thread.c) calls k_object_find() on the caller-supplied thread pointer and then dereferences the returned struct k_object without checking it for NULL. k_object_find() returns NULL whenever the supplied pointer is not a registered (static or dynamic) kernel object. The pre-fix guard tested thread == NULL instead of ko == NULL, so an unprivileged user-mode thread that invokes
- 7.8HighJul 14, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10669On Xtensa SoCs built with CONFIG_XTENSA_MPU and CONFIG_USERSPACE, arch_buffer_validate() in arch/xtensa/core/mpu.c — the architecture hook that verifies a user-mode-supplied buffer is accessible to the calling user thread with the requested permission — defaulted its return value to 0 (access permitted) and only set a denial result inside its per-MPU-region probe loop. When the rounded extent of the buffer wraps the 32-bit address space (size + alignment offset near SIZE_MAX, or ROUND_UP(size +
- 2.4LowJul 12, 2026Zephyrproject zephyr Denial of serviceCVE-2026-10668The Nuvoton NuMaker HSUSBD USB device-controller driver (drivers/usb/udc/udc_numaker.c) armed the control Data IN stage unconditionally (base->CEPTXCNT = len in numaker_hsusbd_ep_trigger). Because the HSUSBD hardware cannot disarm a control Data IN already armed for a previous transfer, a USB host that cancels an in-flight control transfer (timeout) and then issues a new SETUP packet can drive the driver out of sync: stale data may be transmitted in the new transfer and the control endpoint can
- 7.8HighJul 12, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10667Zephyr's dynamic kernel-object tracking (kernel/userspace/userspace.c, formerly kernel/userspace.c) maintains a doubly-linked list (obj_list) of dynamically allocated kernel objects. Iteration over this list in k_object_wordlist_foreach() was performed under lists_lock using the SAFE iterator (which caches the next node), but list removal and freeing of nodes was performed under different, disjoint spinlocks: objfree_lock in k_object_free() and obj_lock in unref_check(). On an SMP system, while
- 8.1HighJul 12, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10666parse_ipv4() in subsys/net/ip/utils.c (reached via net_ipaddr_parse() for strings of the form "a.b.c.d:port") copies the port substring into a fixed 17-byte stack buffer (char ipaddr[NET_IPV4_ADDR_LEN + 1]) using a length of str_len - end - 1, where str_len is the full, unbounded input length and end is only the (<=15-byte) offset of the ':' delimiter. Because the destination size is never consulted, a crafted address string with a long suffix after the colon (e.g. "1.2.3.4:" followed by hundred
- 7.4HighJul 12, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10665In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP da
- 5.0MediumJul 12, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10664The nRF70 Wi-Fi driver's power-save event handler nrf_wifi_event_proc_get_power_save_info() in drivers/wifi/nrf_wifi/src/wifi_mgmt.c copied TWT (Target Wake Time) flow entries from an nrf_wifi_umac_event_power_save_info event into the fixed-size twt_flows[WIFI_MAX_TWT_FLOWS] (8-element) array of a caller-supplied struct wifi_ps_config, looping over event-provided num_twt_flows without validating it against WIFI_MAX_TWT_FLOWS or checking event_len. When num_twt_flows exceeds 8, the handler writes
- 6.1MediumJul 12, 2026Zephyrproject zephyr Memory corruptionCVE-2026-10663In Zephyr's experimental USB host stack (CONFIG_USB_HOST_STACK), usbh_device_disconnect() (subsys/usb/host/usbh_device.c) freed the root usb_device slab object without clearing the cached pointer ctx->root. The bus removal handler dev_removed_handler() (subsys/usb/host/usbh_core.c) decides what to tear down solely from ctx->root, checking only that it is non-NULL. Because UHC controller drivers (e.g. uhc_max3421e, uhc_mcux_common) synthesize UHC_EVT_DEV_REMOVED directly from physical bus line s
Top products
- zephyr39 CVEs in the last year
Counts cover CVEs and advisories Watch Floor tracks, by the date they became news. Updated every 10 minutes.